Shanghai Sunland Industrial Co., Ltd is the top manufacturer of Personal Protect Equipment in China, with 20 years’experience. We are the Chinese government appointed manufacturer for government power,personal protection equipment , medical instruments,construction industry, etc. All the products get the CE, ANSI and related Industry Certificates. All our safety helmets use the top-quality raw material without any recycling material.
Nanning helmet sales
We provide exclusive customization of the products logo, using advanced printing technology and technology, not suitable for fading, solid and firm, scratch-proof and anti-smashing, and suitable for various scenes such as construction, mining, warehouse, inspection, etc. Our goal is to satisfy your needs. Demand, do your best.
Professional team work and production line which can make nice quality in short time.
Address：No. 3888, Hutai Road, Baoshan District, Shanghai, China
safety, and reduce the need for transport of ,cylinders, around the ship. † Gas ,cylinders, shall always be fitted with valve caps before transport, and appropriate ,cylinder, trollies shall always be used for transport. Secure the ,cylinders, properly in upright position. Acetylene and ,oxygen, regulators shall be fitted with flashback arrestors.
The ,cylinder should, also have a label marked with the type of gas. To prevent the interchange of fittings between ,cylinders, containing combustible and non-combustible gases, ,oxygen cylinders, have a right-hand and acetylene have a left-hand thread. All ,cylinders, are opened by turning the key or knob anticlockwise and closed by turning them ...
All gas ,cylinders, shall ,be equipped, with a functioning gas regulator while in use. No one shall attempt to connect a regulator and/or accessory equipment by the use of improvised hookups or adapters. When personnel have finished using a compressed gas ,cylinder, for the day, the ,cylinder, valve shall be closed and the pressure in the regulator and associated equipment released.
g. When ,oxygen cylinders, are in use or being roved, care must be taken to avoid dropping, knocking over, or striking the ,cylinders, with heavy objects. Do not handle ,oxygen cylinders, roughly. h. All ,oxygen cylinders, with leaky valves or ,safety, fuse plugs and discs ,should, be set aside and marked for the attention of the supplier.
Where a liquid ,oxygen, system is to be used to supply gaseous ,oxygen, for welding or cutting and the system has a storage capacity of more than 13,000 cubic feet (364 m 3) of ,oxygen, (measured at 14.7 psia (101 kPa) and 70 °F (21.1 °C)), connected in service or ready for service, or more than 25,000 cubic feet (700 m 3) of ,oxygen, (measured at 14.7 psia (101 kPa) and 70 °F (21.1 °C ...
Containers are ,equipped, with a pressure relief device. (Exceptions may exist where authorized by DOT.) No part of the container ,should, be subjected to a temperature higher than 125°F (52°C). Smoking, flames, and electric sparks in the presence of enriched ,oxygen, atmospheres are potential explosion hazards. SECTION 6: Accidental release ...
OXYGEN CYLINDER,:-,SAFETY, IN GAS CUTTING. ,Oxygen, is a colorless, tasteless, and odorless gas and is slightly heavier than air. ,Oxygen cylinder, is black in color. ,Oxygen, stored at 2200 psi. ,Oxygen cylinders, have a volume of 6.9 m3. A standard ,oxygen cylinder, pressure between 154.6753 kg/cm2(2200 PSI) to 77.33765 kg/cm2 (1100 PSI)
The use of such equipment will ensure a supply of ,oxygen, to the wearer so that he can perform his particular tasks in ,safety,. Two basic types are in use—the smoke ,helmet, and the self-contained unit using air ,cylinders,. The smoke ,helmet, arrangement uses a ,helmet, which covers the …
Always follow these basic ,safety, rules when working with oxy-fuel equipment: Chain ,cylinders, to prevent their falling over. An ,oxygen cylinder, with over 2,000 psi in it becomes a lethal projectile if it falls over and its ,cylinder, valve is sheared. Vent ,the oxygen, regulator valve before attaching the regulator to the ,cylinder,.
For optimal protection of the head, a ,safety helmet should, be adjusted to the size of the head of the user. The usefulness of the ,helmet, duration is determined by, among others, cold, heat, chemicals and (in)correct use. ,Safety helmets, are also available with integral visor or an integrated goggle.